Tiering reports for EMC’s FAST VP

Note: On a separate blog post, I shared a script to generate a report of the tiering status of all LUNs.

One of the items that EMC did not implement along with FAST VP is the ability to run a canned report on how your LUNs are being allocated among the different tiers of storage.  While there is no canned report, alas, it is possible to get this information from the CLI.

The naviseccli –h {SP IP or hostname} lun –list –tiers command fits the bill. It shows how a specific LUN is distributed across the different drive types.  I still need to come up with a script to pull out only the information that I want, but the info is definitely in the command’s output.

Here’s the sample output:

LOGICAL UNIT NUMBER 6
 Name:  LUN 6
 Tier Distribution:
 Flash:  13.83%
 FC:  86.17%

The storagepool report gives some good info as well.  Here’s an excerpt of what you see with the naviseccli –h {SP IP or hostname} storagepool –list –tiers command:

SPA

Tier Name:  Flash
 Raid Type:  r_5
 User Capacity (GBs):  1096.07
 Consumed Capacity (GBs):  987.06
 Available Capacity (GBs):  109.01
 Percent Subscribed:  90.05%
 Data Targeted for Higher Tier (GBs):  0.00
 Data Targeted for Lower Tier (GBs):  11.00

Tier Name:  FC
 Raid Type:  r_5
 User Capacity (GBs):  28981.77
 Consumed Capacity (GBs):  10592.65
 Available Capacity (GBs):  18389.12
 Percent Subscribed:  36.55%

Tier Name:  SATA
 Raid Type:  r_5
 User Capacity (GBs):  11004.67
 Consumed Capacity (GBs):  260.02
 Available Capacity (GBs):  10744.66
 Percent Subscribed:  2.36%
 Data Targeted for Higher Tier (GBs):  3.00
 Data Targeted for Lower Tier (GBs):  0.00
 Disks (Type):

SPB

Tier Name:  Flash
 Raid Type:  r_5
 User Capacity (GBs):  1096.07
 Consumed Capacity (GBs):  987.06
 Available Capacity (GBs):  109.01
 Percent Subscribed:  90.05%
 Data Targeted for Higher Tier (GBs):  0.00
 Data Targeted for Lower Tier (GBs):  25.00

Tier Name:  FC
 Raid Type:  r_5
 User Capacity (GBs):  28981.77
 Consumed Capacity (GBs):  10013.61
 Available Capacity (GBs):  18968.16
 Percent Subscribed:  34.55%
 Data Targeted for Higher Tier (GBs):  25.00
 Data Targeted for Lower Tier (GBs):  0.00

Tier Name:  SATA
 Raid Type:  r_5
 User Capacity (GBs):  11004.67
 Consumed Capacity (GBs):  341.02
 Available Capacity (GBs):  10663.65
 Percent Subscribed:  3.10%
 Data Targeted for Higher Tier (GBs):  20.00
 Data Targeted for Lower Tier (GBs):  0.00

Good stuff in there.   It’s on my to-do list to run these commands periodically, and then parse the output to filter out only what I want to see.  Once I get that done I’ll post the script here too.

Note: I did create and post a script to generate a report of the tiering status of all LUNs.

Advertisements

2 thoughts on “Tiering reports for EMC’s FAST VP”

  1. We have just had Symmetrix VMAX installed. FAST is configured and we have some storage groups with test policies.

    How do you get an analysis report for what will want to move to faster storage?

    1. We only have Clariion, Celerra, and VNX systems installed here so I can’t speak directly to the capabilities of your VMAX. There are no built in reports for tiering as of yet on the platforms that I support. I spoke to Susan Sharpe (an EMC Product Manager involved with FAST VP) at EMC World this year, and she told me that EMC does have built-in tiering reports on their radar screen but it would likely not be available this year. At least they are aware of their customer’s desire to have that capability.

      The only information that I have figured out how to get from the CLI is the existing distribution of data per LUN, and the data targeted for a higher or lower tier by disk type (as already posted in this blog entry). You can also quickly see the amount of data slated for migration in Unisphere (up or down) on the Storage Pools screen. I wish I had a better answer for you, but that’s all EMC supports right now for reporting.

      Thanks for your post.

Leave a Reply